Anders jobs

Building Engineer Facilities Management (all genders). Full role description available at the original source.

Aircraft Mechanic (m/w/d). Full role description available at the original source.

F-35 Metal Repair Operator Location: RAF Marham, PE33 9NP Contract Type: Contract Duration: 20 months Hours: Monday–Thursday, 37 hours per week Rate: £28.11 UMBRELLA / £21.00 PAYE per hour Overview Morson Edge are recruiting for a Metal Repair Operator to support critical aircraft maintenance operations on the F-35 fast jet within a highly regulated aviation environment. Working as part of a close-knit, multi-skilled team, you will carry out metalworking and corrosion remediation activities, supporting the safe and efficient maintenance of aircraft structures. This role is ideally suited to individuals with hands-on experience in structural repair and a strong understanding of approved maintenance practices. Key Responsibilities Carry out metalworking and corrosion remediation activities on aircraft structures Perform repairs in accordance with approved technical documentation and maintenance instructions Prepare metal and composite surfaces for repair activities Undertake drilling, honing, and reaming of aircraft structures Remove and install aircraft fasteners and components Apply adhesive bonding techniques where required Work in accordance with approved maintenance data and organisational procedures Maintain high standards of workmanship, safety, and compliance Support team activities within a multi-disciplined maintenance environment Essential Skills & Experience Experience using manual and pneumatic tooling Experience preparing metal and/or composite aircraft structures for repair Experience with drilling, honing, and reaming processes Experience removing and installing various types of fasteners Experience with adhesive bonding applications Ability to work to maintenance instructions and approved data sets Strong attention to detail and commitment to quality workmanship Qualifications Completion of an Engineering Apprenticeship (Aeronautical Engineering advantageous) Minimum NVQ Level 2 (or equivalent recognised qualification) Acceptable awarding bodies include City & Guilds, IMI, Edexcel, EAL, SEMTA, ATA (or equivalent) Candidates with equivalent experience (e.g. military service) must be able to provide supporting evidence Working Environment Based at RAF Marham Monday–Thursday working pattern (37 hours per week) Working within a multi-skilled aircraft maintenance team Role may involve working in a regulated and safety-critical environment This is an excellent opportunity to join a specialist team supporting advanced aircraft maintenance operations, contributing to the continued airworthiness and performance of modern military aircraft.

Senior Aircraft Mechanical Supervisor Location: RAF Valley, Isle of Anglesey Position: Permanent Salary: £37,271.74 + £3,978 shift allowance Reference: SF73192 Overview Morson Edge is supporting a leading aerospace and defence organisation in the recruitment of a Senior Aircraft Mechanical Supervisor to support Hawk fast jet aircraft maintenance operations at RAF Valley. This is an excellent opportunity for an experienced aircraft mechanical engineer looking to step into a leadership position within a highly respected military aviation environment. You'll play a key role in supervising maintenance activities, supporting aircraft availability, and ensuring the highest standards of safety, quality, and airworthiness are maintained. Based on the Isle of Anglesey, RAF Valley offers the chance to work within an operational fast jet environment while enjoying a unique coastal lifestyle and strong engineering community. Why RAF Valley? Home of UK fast jet pilot training operations Well-established military aviation engineering environment Strong team culture and operational focus Coastal location offering excellent work-life balance Stable programme supporting ongoing aircraft operations 36-hour early shift pattern Key Responsibilities Lead and supervise mechanical maintenance activities on aircraft and aircraft components Allocate and oversee maintenance tasks within approved authorisation levels Ensure all maintenance activities are completed in accordance with approved procedures and airworthiness requirements Carry out and supervise inspections, repairs, modifications, and component replacements Support fault diagnosis and rectification activities Monitor maintenance progress against programme requirements and operational priorities Provide technical guidance and mentorship to engineers and technicians Ensure compliance with aviation safety, quality, and regulatory standards Maintain accurate maintenance documentation and records Promote a safe, efficient, and professional working environment Requirements Previous experience supervising aircraft mechanical maintenance activities Strong aircraft maintenance and fault-finding experience Proven leadership capability within a regulated aviation environment Good understanding of aviation safety, quality, and airworthiness requirements Experience working within military aviation, fast jet, or comparable operational aircraft environments Evidence of maintenance currency and recency through logbook records Ability to work effectively within a safety-critical engineering environment Qualifications Completed engineering apprenticeship (Aeronautical or military equivalent preferred) City & Guilds 2675 or 2661 in Aeronautical Engineering and Maintenance, or equivalent recognised qualification Additional aircraft type training or military aviation qualifications advantageous Key Information Role: Senior Aircraft Mechanical Supervisor Location: RAF Valley, Isle of Anglesey Salary: £37,271.74 Hours: 36-hour early shift pattern Contract Type: Permanent Aircraft: Hawk Environment: Military / Fast Jet Aviation Security Clearance: BPSS eligibility required This is an opportunity to join a highly respected military aviation programme, combining leadership responsibility with hands-on aircraft maintenance in one of the UK's most unique operational environments. If you are interested, please send a CV to or apply directly!

Functional Provisioning Specialist (all genders). Full role description available at the original source.

Holborn Engineering are inviting applications for a Sheet Metal Worker to be based at London Stansted Airport . Duties as a Sheet Metal Worker: Maintenance on the Boeing 737-800. Your daily work will require you to perform tasks such as: Grinding, drilling, riveting, bending, anti-corrosion protection, etc. Working with tools such as Bending machines, guillotines, drills or grinders. Working on the aircraft: working for the most suitable repair solutions in accordance with the documentation and their implementation. Requirements as a Sheet Metal Worker: Must have 5 years Sheet Metal Experience. Basic knowledge of materials used in aviation. Knowledge of technical drawing. Manual skills and precision, attention to detail. Willing to work in shift system. Team player. Right to work and travel in the UK and in Europe.

Motor Vehicle Driver Fleet Central Warehouse (m/w/d). Full role description available at the original source.

Service Agent (m/w/d) at Düsseldorf Airport from €15.29/hour. Full role description available at the original source.

Excel are currently looking for EASA B1 licence holders with type rating and recency on the A350 to support a popular contract based in Paris providing line maintenance on the type with a 5 day on/off rotation. This is an ongoing contract, so we can offer starts whenever you are available (even later in the year, for Winter season) so, even if you are not available now, you can still apply! You will work 10 hours per day paid at €616 per day , with accommodation provided and travel allowance for flights. An A1 is required - but we can help with how to get that So if you have the 350 on your licence and you want to get involved in this one, please apply!

Process Engineer (m/w/d) MCA H160 AIRBUS. Full role description available at the original source.

CNC Carpenter for Cabin Furniture (VIP / Special Mission) in Aviation (m/w/d). Full role description available at the original source.

Excel are currently looking for EASA B1 licence holders with type rating and recency on the B737NG to support a popular contract based in Paris providing line maintenance on the type with a 5 day on/off rotation. This is an ongoing contract, so we can offer starts whenever you are available (even later in the year, for Winter season) so, even if you are not available now, you can still apply! You will work 10 hours per day paid at up to €573 per day , with accommodation provided and travel allowance for flights. An A1 is required - but we can help with how to get that So if you have the 737 on your licence and you want to get involved in this one, please apply!

Team Leader Warehouse (m/f/d). Full role description available at the original source.

ISS Responsible for Ground-Based Radar Systems (m/f/d). Full role description available at the original source.

Plant Mechanic (m/f/d). Full role description available at the original source.

✈️ First People Solutions – The Leading HM Staffing Provider Are Full on For Season 26/27 ✈️ Boeing 737 NG & MAX – B1 Engineers, Mechanics & Sheet Metal Workers Wanted! ✈️ Location: Poland – Heavy Maintenance Base Projects ✈️ Contract Length: 9 Months 1st Sept Start – Christmas Break 22 Dec–4 Jan and runs till April / May 27 ✈️ We’re looking for skilled B1 Engineers, Mechanics, and Sheet Metal Specialists to join our high-energy heavy maintenance team on the Boeing 737 NG & MAX fleet. ✈️ What’s on offer: Long hours available – maximize your earnings Return flights provided – At Start and End Accommodation & local transport covered Christmas break to recharge ✈️ What you’ll need: Your own PPE & tools Relevant experience on Boeing 737 NG & MAX A can-do attitude and readiness to hit the ground running ✈️ Why join us? This is your chance to work on exciting projects, in a supportive team, with excellent earning potential and all major logistics taken care of. 📩 Contact our recruitment team today for full details and secure your place before the hangar doors close! 🙋 Team Contacts Antonella Torre Anthony Gray Jack Reid Gillian Paterson Cat Mitan

✈️ First People Solutions – The Leading HM Staffing Provider Are Full on For Season 26/27 ✈️ Boeing 737 NG & MAX – B1 Engineers, Mechanics & Sheet Metal Workers Wanted! ✈️ Location: Kaunas Lithuania– Heavy Maintenance Base Projects ✈️ Contract Length: 9 Months 1st Sept Start – Christmas Break 22 Dec–4 Jan and runs till April / May 27 ✈️ We’re looking for skilled B1 Engineers, Mechanics, and Sheet Metal Specialists to join our high-energy heavy maintenance team on the Boeing 737 NG & MAX fleet. ✈️ What’s on offer: Long hours available – maximize your earnings Return flights provided – At Start and End Accommodation & local transport covered Christmas break to recharge ✈️ What you’ll need: Your own PPE & tools Relevant experience on Boeing 737 NG & MAX A can-do attitude and readiness to hit the ground running ✈️ Why join us? This is your chance to work on exciting projects, in a supportive team, with excellent earning potential and all major logistics taken care of. 📩 Contact our recruitment team today for full details and secure your place before the hangar doors close! 🙋 Team Contacts Antonella Torre Anthony Gray Jack Reid Gillian Paterson Cat Mitan

Board Member of AntiSkid Foundation (m/f/d). Full role description available at the original source.

Dual Degree Programme Tourism Management (B.A.) at Virtual Campus - DB Travel Agency Mölln. Full role description available at the original source.

Scheduling Coordinator (m/f/d) at Cologne/Bonn Airport. Full role description available at the original source.

Senior Trimmer Job Description: Job Role : To carry out and oversees trimming and polishing operations to ensure parts meet finish, quality and delivery requirements. The role focuses on correct set up, effective task control, inspection compliance and day to day support of operators to maintain safe, efficient production. Hours & Days of Work including shift:- 37.5 hours, Mon - Fri Responsible for ensuring all polishing and trimming operations are carried out safely, efficiently and to the required quality standard, supporting delivery to customer requirements and overall production targets. Key Duties and Responsibilities • Plan and organise work within the trimming area to meet customer demand and maximise throughput. • Ensure all scheduled production dates are achieved, proactively managing priorities to maintain flow. • Identify, communicate and escalate any expected or actual variations against schedule in a timely manner. • Set up and operate trimming and polishing equipment to achieve the specified surface finish and dimensional requirements • Ensure all inspection activities are carried out in accordance with inspection plans and that all required documentation is accurately completed. • Identify and report quality issues, including those attributed to other functions, ensuring relevant non conformance documentation is raised and communicated appropriately. • Ensure all work is carried out in full compliance with company procedures, engineering requirements, and Environmental, Health and Safety (EHS) standards. • Take responsibility for the training, mentoring and development of trimming personnel, ensuring initial competency, ongoing skills development and task authorisation are maintained. • Liaise closely with colleagues, Area Leader, Supervisors and cross functional teams (e.g. Quality, Engineering, Planning) to support efficient production and issue resolution. • Support continuous improvement activities within the trimming area, including improvements to quality, efficiency, standardisation and housekeeping (5S). • Undertake additional tasks, including work in other operational areas, as requested by the Operations Manager, within the limits of capability and training. General Responsibilities; • Comply with all company Environmental, Health and Safety (EHS) requirements. • Read and understand the requirements on the Job Card for the operation to be carried out.• Ensure that all the documentation required to carry out the operation in accordance with the Job Card is available at the point of use and at the correct revision. • Read and understand all manufacturing instructions prior to commencing an operation, this includes Machine and Tooling Set Up Packs as required, Engineering Drawings, Data Cards, Inspection Plans etc. • Use of all measuring equipment as defined within Inspection Plans to check conformance to requirements. • Carry out in process inspection in accordance with relevant inspection plans to ensure that components are conforming prior to passing on to subsequent operations.• Ensure that components identified as non-conforming during in process inspection are identified and communicated in accordance with the Non-Conformance Procedure. • Complete all work booking requirements within the MRP system to ensure accurate WIP records.• Follow work handling and storage instructions to prevent damage to components. • Support Root Cause Analysis activities when non-conformance occurs to prevent reoccurrence. • Carry out and record all TPM activities in accordance with the specified schedule for the equipment being operated.• Ensure that work areas are tidy, cleaned and maintained in accordance with 5S requirements. • Engage and contribute to Continuous Improvement activities to maximise efficiency.• Comply with all company procedures and policies. From time to time, you may be required to perform other duties as requested by your Line Manager, and whilst not listed above, these duties will be appropriate to the level of responsibility held and to the scope of the role as defined.PERSON SPECIFICATION • Extensive experience in metal trimming and polishing operations, ideally within an aerospace, precision engineering or regulated manufacturing environment. • Strong understanding of surface finish requirements, drawing interpretation and engineering tolerances. • Competent in the use of hand held and fixed trimming and polishing equipment. • Proven ability to set up equipment accurately and consistently to achieve repeatable, high quality outputs. • Sound knowledge of inspection techniques and use of measuring equipment. • Demonstrated ability to identify defects, non conformances and process issues, with a focus on right first time delivery. • Experience in training, coaching or mentoring other operators. • Ability to plan workload, prioritise tasks and manage time effectively in a fast paced production environment. • Strong communication skills, with confidence to raise concerns, escalate issues and collaborate across functions. • Good level of IT literacy for completion of production, quality and training records. • High attention to detail, with a disciplined and safety focused approach to work. • Flexible and adaptable, with willingness to support other areas when required What's on offer: - Competitive hourly rate - 3-6 months contract - must have the right to work in the UK Interested then please apply today

Excel Technical Consulting have a new line maintenance contract available for EASA B2 Engineers with type ratings and currency on the A320 family. The contract is starting as soon as possible working through the summer season and will finish at the end of the year with a possible extension into next year. For this position we only require one engine type so you do not need the CEO&NEO on your licence. The contract is based in Germany therefore we require a valid ZUP which can be from any municipality in Germany. The work is line maintenance only working on a 7/7 rotation at our clients station in Dusseldorf. You will be working a mixture of days & nights working between 60-70 hours each rotation, please see below the package available for this position: - €50 per hour - 60/70 hours per week - Accommodation & Local Transport Provided - Rotational Travel Provided To be considered for this role you must have the right to work in Europe and able to obtain an A1 form that evidences social contributions are being made in Europe. If this contract is of interest to you then please apply and we can contact you with more information.

Job Purpose Emirates Flight Training is a modern, progressive department that utilises Competency Based Training and Assessment (CBTA) methodology in all our courses and is one of the few full Evidence Based Training (EBT) operators worldwide. Through continuous professional development and standardisation, you can expect to be trained and developed in the most up to date training methodologies to ensure you meet the exacting standards required by Emirates. As part of Emirates Airline’s continued growth, we are seeking experienced aviation professionals to join our Flight Training department in non-flying, ground-based roles as Synthetic Flight Examiner (SFE). This position is responsible for conducting pilot proficiency evaluations using Flight Simulation Training Devices (FSTDs) and overseeing ground-based assessments in accordance with GCAA regulations and Emirates’ standards. Conduct regulatory and company-mandated proficiency checks, skill tests, and assessments using Flight Simulation Training Devices (FSTDs), in line with GCAA regulations and Emirates' training standards. Evaluate pilot performance during recurrent, type rating, recency, and upgrade training sessions, ensuring consistency and objectivity in line with established benchmarks. Complete and submit accurate and detailed examination reports and assessments using the electronic reporting system within prescribed timelines. Identify performance gaps and recommend remedial or additional training as required to uphold safety and competency standards. Provide detailed feedback to training management regarding pilot performance trends, systemic issues, or potential improvements in instructional methodology and training effectiveness. Support training program development, course reviews, and other departmental initiatives related to simulator and ground-based pilot evaluation. Qualification Hold or have held a CPL Commercial Pilot License MPL Multicrew Pilot License or ATPL Airline Transport Pilot License Experience Minimum 12 months as an active Examiner Minimum 1500 hours flight time as a pilot on multipilot aeroplane Advanced communication and leadership skills Salary & benefits 35,280 AED Company provided accommodation Comprehensive medical insurance Staff Travel

Job Purpose Emirates Flight Training is a modern, progressive department that utilises Competency Based Training and Assessment (CBTA) methodology in all our courses and is one of the few full Evidence Based Training (EBT) operators worldwide. Through continuous professional development and standardisation, you can expect to be trained and developed in the most up to date training methodologies to ensure you meet the exacting standards required by Emirates. As part of Emirates Airline’s continued growth, we are seeking experienced aviation professionals to join our Flight Training department in non-flying, ground-based roles as Synthetic Flight Examiner (SFE). This position is responsible for conducting simulator pilot checks, licensing tests, instructor assessments of competence validations (AOC) and EBT training programmes as required by the regulator and in line with company policies and procedures. Conduct FSTD (Flight Simulator Training Device) type rating training and ground school in line with company procedures and requirements. Conduct recency training as required by the company in accordance with the approved syllabus. Conduct Fixed Base and Full Flight Simulator transition training. Conduct instructor and examiner simulator training. Complete and submit accurate detailed reports and assessments of pilots under instruction in accordance with company guidance and policy via the existing electronic reporting system. Recommend additional or remedial training for trainee pilots who are not progressing at an acceptable rate as per expected performance standards. Provide recommendations to training management for any changes that may improve efficiency, safety, quality of training and standardize procedures and teaching techniques. Support with ad hoc projects, course development and other tasks as required. Qualification Hold or have held an ATPL Airline Transport Pilot License Minimum 1500 hours flight time as a pilot on multipilot aeroplane Experience Minimum 6 months as an active TRI/SFI Valid SFI/TRI certificate for applicable type Advanced communication and leadership skills Salary & benefits 35,280 AED Company provided accommodation Comprehensive medical insurance Staff Travel